High Strength and Low Power Consumption Fiberglass Sheet:
Product advantages:
A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
D. Electro-magnetic transparency
FRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.
E. Non-conductive
FRP has low thermal/ electrical conductivity.
F. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.]
Relevant specification and weight of fiberglass sheets bellow :
| products name |
specification(mm) |
weight(g/m) |
| fiberglass sheet |
2*10m/m |
38 |
| 2*12m/m |
45.6 |
| 2*15m/m |
57 |
| 2*23m/m |
87.4 |
| 3*9m/m |
51.3 |
| 3*12m/m |
68.4 |
| 3*15m/m |
85.5 |
| 3*25m/m |
142.5 |
| 3*30m/m |
171 |
| 3.5*40m/m |
266 |
| 4*15m/m |
114 |
| 4*20m/m |
152 |
| 4.5*12.3m/m |
55.35 |
| 5*12m/m |
114 |
| 5*30m/m |
285 |
| 5*37m/m |
351.5 |
| 5*50m/m |
475 |
| 6*15m/m |
171 |
| 6*20m/m |
228 |
| 6*30m/m |
342 |
| 8.3*16m/m |
252.32 |
Audited Supplier 
){kind=link}
){kind=link}